Water Heating › Gas Hot Water Cylinders

Gas Hot Water Cylinders Auckland

Gas Hot Water Cylinder Specialists Across Auckland, install, repair, service and upgrade by Certifying gasfitters.

If you're looking for an experienced gas hot water cylinder specialist in Auckland, you've come to the right place. Our Certifying gasfitters have decades of combined experience installing, repairing, servicing and upgrading gas hot water cylinders throughout the wider Auckland region.

Unlike many companies that simply recommend replacing your entire hot water system, we take the time to properly diagnose the problem first. Many faults can be repaired safely and economically, potentially saving you thousands of dollars.

Whether your cylinder has stopped producing hot water, is leaking gas, has ignition problems, or simply isn't performing as it should, our team has the expertise to get your system operating safely and efficiently again.

Rheem Stellar gas hot water cylinder installed in Auckland
Rheem Stellar
Auckland install
Certifying Gasfitters You Can Trust

All gas work should only be carried out by a registered and Certifying gasfitter.

Every installation and repair is completed to current New Zealand standards with the appropriate testing and certification.

  • Domestic gas hot water systems
  • Commercial gas hot water systems
  • Natural Gas installations
  • LPG installations
  • Gas appliance servicing
  • Gas safety inspections
  • Gas leak detection
  • Gas compliance certification
  • Hot water cylinder repairs
  • Complete hot water system replacements
Brands We Service

Gas Hot Water Cylinder brands we know inside out

Our technicians work on virtually every major gas hot water cylinder found throughout New Zealand. Whether your cylinder is 5 years old or over 30 years old, we can usually identify faults, source replacement parts where available, and advise whether repair or replacement is the better long-term investment.

RheemRheem StellarRuudVulcan FreeloaderDuxRinnaiBoschPalomaAquamaxEverhotEdwardsSaxonOlder Rheem & Ruud
Stellar cylinder installRheem Stellar upgradeExternal Stellar installFreeloader replacement
Vulcan Freeloader Upgrades

Replacing Old Vulcan Freeloader Hot Water Cylinders

One of the most common upgrades we carry out is replacing ageing Vulcan Freeloader gas hot water cylinders. Thousands of these systems were installed throughout Auckland and, while many have provided decades of reliable service, replacement parts are becoming increasingly difficult to source.

For most homeowners, the Rheem Stellar Outdoor Gas Storage Cylinder is the ideal replacement. Rheem specifically markets the Stellar as the replacement for older Vulcan Freeloaders.

  • Excellent mains pressure performance
  • High hot water recovery
  • Suitable for multiple bathrooms
  • Advanced SuperFlue efficiency
  • Vitreous enamel cylinder protection
  • No electricity required to operate
  • Australian manufactured
  • Long manufacturer warranty
  • Modern, attractive appearance
Recent Work

Cylinder installs completed across Auckland

Rheem Stellar external install
Rheem Stellar external install
Stellar mains pressure upgrade
Stellar mains pressure upgrade
External Stellar replacement
External Stellar replacement
Rheem Stellar Auckland install
Rheem Stellar Auckland install
Stellar cylinder with insulated pipework
Stellar cylinder with insulated pipework
Stellar Freeloader replacement
Stellar Freeloader replacement
Internal cupboard Rheem install
Internal cupboard Rheem install
Older Ruudglas Pacemaker service
Older Ruudglas Pacemaker service
Legacy Ruud cylinder inspection
Legacy Ruud cylinder inspection
Commercial Ruud twin cylinders
Commercial Ruud twin cylinders
Pressure Upgrades

Low Pressure to Mains Pressure Upgrades

Still living with a low pressure hot water system? Many older Auckland homes were originally built with low pressure cylinders. Upgrading to a mains pressure gas hot water cylinder can dramatically improve the comfort and performance of your home.

Signs you have low pressure

  • Weak showers
  • Slow bath filling
  • Poor mixer tap performance
  • Inconsistent water pressure
  • Limited hot water flow

Benefits of mains pressure

  • Powerful showers
  • Better pressure throughout the house
  • Multiple taps running simultaneously
  • Improved kitchen performance
  • Better compatibility with modern tapware
  • Increased property value

We'll inspect your plumbing and recommend the right upgrade while ensuring your pipework and pressure limiting valves are correctly configured.

Repairs

Gas Hot Water Cylinder Repairs

Not every gas hot water cylinder needs replacing. Our goal is always to repair where it is safe, practical and economical to do so.

Pilot light won't stay on

  • Faulty thermocouples
  • Blocked pilots
  • Gas valve faults
  • Flame sensing issues

No hot water

  • Gas control valve faults
  • Burner issues
  • Thermostat failures
  • Blocked injectors
  • Gas supply issues
  • Water flow problems

Cylinder won't ignite

  • Faulty ignition modules
  • Flame sensors
  • Wiring issues
  • Gas valve problems

Running out of hot water

  • Burner performance issues
  • Sediment build-up
  • Thermostat calibration
  • Incorrect gas pressure
  • Oversized household demand
Safety

Gas Leak Detection

Gas leaks should never be ignored. Using specialist electronic leak detection equipment and pressure testing, we can accurately locate leaks, then repair, retest and certify the installation.

Warning signs

  • Smell of gas
  • Hissing sounds
  • Poor appliance performance
  • Pilot lights going out
  • Higher than normal gas bills

Where we detect leaks

  • Gas hot water cylinders
  • Gas pipework
  • Appliance connections
  • Underground gas lines
  • Regulators
  • Isolation valves
Servicing

Comprehensive Gas Safety Checks

Every gas hot water cylinder should be checked regularly. Our inspections help identify problems before they become expensive failures or safety risks.

Gas tightness testing
Burner inspection
Flame pattern analysis
Gas pressure testing
Flue inspection
Ventilation assessment
Safety device operation
Gas valve testing
Temperature checks
Carbon build-up inspection
Water pressure checks
Tempering valve operation
Cylinder condition assessment
Repair vs Replace

When Should You Replace a Gas Hot Water Cylinder?

We'll always explain your options and provide honest advice so you can make an informed decision.

  • The cylinder has developed an internal leak
  • Replacement parts are no longer available
  • Repairs are no longer cost-effective
  • The cylinder has significant corrosion
  • The burner assembly has reached the end of its service life
  • The cylinder no longer meets your household's hot water demand
  • You want to upgrade from low pressure to mains pressure
Why choose us

Auckland's Gas Hot Water Experts

From older Vulcan Freeloaders to modern Rheem Stellar systems, our experienced gasfitters have worked on virtually every type of gas hot water cylinder installed throughout Auckland.

Certifying & Registered Gasfitters
Decades of specialist gas experience
Repair before replace philosophy
Gas leak specialists
Mains pressure upgrade experts
Rheem Stellar installation specialists
All gas work Certifying
Domestic and commercial gas systems
Servicing the wider Auckland region
Honest advice with no unnecessary upselling

Talk to Auckland's gas hot water experts.

Safety inspections, gas leak repairs, pilot light fixes, servicing and complete upgrades, backed by decades of specialist gas experience.

Call 09 889 9830

Need a Certifying Gasfitter today?

Free quotes across Auckland. Same-day callouts available.